Cattywampus | 2019 Kelsall 38ma

Portland, ME, US

Cattywampus | Kelsall 38ma 38.25ft

US$ 165,000

Portland, ME, US

...

Mike Rybas

 Office:+1 215-508-2704
  Mobile:+1 267 324-9067
 mike@multihullcompany.com

About

Cattywampus was built at Maine Yacht Center. The build is complete and the boat is fully operational under power. The fit out of systems, electrical and rigging is yet to be done. No sails.

Derek Kelsall 38ma full set of digital plans

2014 build year launched spring 2019

Vacuum infused panel construction H80 Divinycell and unidirectional glass

38.3 LOA

21 Beam

3.1 Draft (mini-keels foam filled)

Twin Tohatsu 20HP fuel injected outboards (2019) 9kts cruise speed 20hrs runtime

Two aluminum gasoline fuel tanks 16 gal each port and starboard

Two fireboy automatic fire extinguishers in each engine space

Kobelt hydraulic helm pump twin Vetus hydraulic steering cylinders

Twin spade rudders fabricated by Ruddercraft

New complete Sparcraft rotating aluminum mast and boom Facnor mainsail batten car system

New Dynex Dux standing rigging mast attachment lashings done by Gorilla Rigging in Newport

2 double berth aft in each hull

1 single berth forward on starboard

Beckson inspection hatches throughout

1 head forward on port AirHead compositing toilet

All 8 exterior opening hatches Lewmar medium profile 6 of them with screens

2 new AGM deep cycle batteries

3000W Victron Inverter Charger

Wall mounted wifi enabled TV

12VDC cabinet style, water cooled, under counter refrigerator and freezer

2 burner induction cooktop

Convection microwave

Dual pressure fresh water pumps, expansion tanks, stainless sink, faucet 1.5gal water heater

Two polyethylene water tanks 55 gallon each port and starboard

Numerous build parts and spares 4 new Harken winches, hardware, etc

New bottom paint


Broker Note: very high quality build. With a month or two of hard work, someone could have a very special boat. Build construction is far superior to any production boat.

Specifications

  • Length: 38ft
  • Beam: 21' 0"
  • Year: 2019
  • Hull: Composite
  • Status: Active

View More Specs

SPECS

MEASUREMENTS

  • Length Overall: 38.25 ft
  • Beam Measure: 21' 0"

ENGINE(S)

Additional Information

I have attached a drawing from the plans which shows the layout. The only departures from this are the main salon and aft deck in this boat the settee is forward on the starboard side and the L shaped galley is aft on the port side. A nav desk area exists on the port side forward. For the aft deck, instead of the central steering station shown, there are stations port and starboard with the wheel to port. The intent was that the starboard station would have sailing controls and an autopilot controller for follow up steering.

As for the other information:

Aft bunks 45W at forward end x 86L

Forward bunk 34W at aft end x 78L

Can it be completed where it is? Yes and no. Owner work is allowed in the outside storage areas 24/7. I could provide free storage for the boat through 8/31/25. Beyond that, I cannot guarantee a storage space (possible but not guaranteed). MYC personnel (not me) would be available to assist at retail labor rates rate sheet attached for reference.

Cost of where it is? Again, free until 8/31/25. After that, winter storage (if available) fee would be $7,980 excluding shrinkwrap cover.

What still needs doing? The list is long, but here are some of the items:

  • Deck hardware organization and mounting 4 new Harken size 48 winches are included with the boat but are not fitted
  • Complete running rigging and sails currently there are dyneema running backs and 2:1 main halyard. I have some used Class 40 sails that I might have recut for the first set of sails.
  • Windlass/anchor
  • Nav lights
  • Cockpit canvas enclosure if desired
  • Expansion of plumbing system currently just hot and cold water to galley sink
  • Expansion of electrical system currently just basic AC outlets and stove/micro circuits, DC system will need more circuits, distribution panel, solar, etc
  • Navigational electronics currently only wind and depth are installed (Garmin)
  • Shower sump in head (if desired) and bilge pumps (hoses and through hulls are in place)
  • Finish details locker doors, seadeck flooring, trim, more lighting

Lastly, and very importantly, the wooden ships wheel will not be going with the boat. I am happy obtain and provide something to mount to the helm until the new owner decides on a final choice.

Disclaimer

The Company offers the details of this vessel in good faith but cannot guarantee or warrant the accuracy of this information nor warrant the condition of the vessel. A buyer should instruct his agents, or his surveyors, to investigate such details as the buyer desires validated. This vessel is offered subject to prior sale, price change, or withdrawal without notice.

Price History

  • 08/14/2025: US $170,000
  • 05/17/2025: US $220,000
  •  

    Request More Information

      Add to Favorites

      Receive Updates

     

    Open Close

     More Information

    Recent News

    We take pride in our happy customers

    Dear Cynthia and Andrew,
    I wanted to extend my sincere thanks to both of you and The Multihull Company team for the outstanding job you did in successfully closing the sale of our Excess 14. Despite the challenging environment — including new import tariffs and unique buyer requirements — you navigated everything with professionalism, perseverance, and efficiency.
    The transaction was completed smoothly and in good time, which is a true credit to your dedication and expertise. Very well done.
    Thank you again, and I wish you all the very best.
    Warm regards,
    Jurgen

    — J E

    We had an outstanding experience working with Andrew Hodgdon. From the very beginning, he demonstrated deep knowledge of the catamaran we were considering and took the time to understand exactly what we were looking for. He found us the perfect vessel that matched our needs and budget and negotiated a fantastic deal on our behalf.

    What truly set him apart was he responsiveness—every question we had was answered promptly and thoroughly, and he guided us through the entire process with professionalism and care. We couldn’t be happier with the service and highly recommend him to anyone looking for a knowledgeable and dedicated yacht broker.

    — Alina Serbanescu

    Awesome company that worked as my brokerage on purchasing out FP catamaran. A special shoutout to Will Miller for walking us through the process

    — Greg Rentz

    The process of selling our boat was made very smooth by the Multihull Company and Andrew Hodgdon in particular. Andrew helped us navigate the selling process including moving our boat from Grenada to Florida to execute the sale. We would recommend working with this company, and Andrew Hodgdon in particular, without hesitation.

    — Piotr Romanus

    Very smooth process. Chuck was great and very knowledgeable about the whole process. Im happy to have had TMC to take care of all the things i didnt know about.
    Andy

    — Andrew Calhoun

    See All Testimonials

    Trust & ExpertiseAbout Us

    Successful relationships cannot exist without it. At The Multihull Company we base every relationship on a firm commitment to earning and retaining our client’s trust.

    Advice of any kind is valuable only when grounded in hard-won expertise. It too, must be trustworthy. Trust and expertise define the heart and soul of The Multihull Company. We are a team of skilled professionals who thrive on providing expert, trustworthy advice and service to catamaran and trimaran sailors around the globe.

    Read More

    Follow us @themultihullcompany