Story by TMC Editor / August 3, 2017

By: Tim Murphy
This article was originally published in Cruising World Magazine is being used with express permission from the publisher.

The all epoxy Balance 526 is a performance-oriented couples cruising boat.

In the world of cruising catamarans, a debate has been raging for more than 20 years: Payload or performance? The palaver started in the mid-1990s, when cats began rolling out in increasing numbers for larger populations of sailors, including charterers. The boats were marketed on the basis of two mutually exclusive promises: their displacement-busting speed potential or their capacity to carry all the comforts of a well-appointed apartment. Sailors snarked about roomarans, the boats you might want to take anchoring but never sailing. At the other end of the cat spectrum were thoroughbreds marketed to couples but in fact sailed by pro crews.

The Balance 526 was forged in the smithy of this debate.

“We’re not creating a charter cat, and we’re not creating a racing cat,” says Phil Berman, owner of Balance Catamarans. “We’re creating a high-performance cruising cat for a couple to sail on.”

If the 526 isn’t the first model Berman created with those aims in mind, it is certainly the most successful.

What’s the secret in this boat? It starts with Berman’s build partners at Nexus Yachts (see “The Artisan Cat Builders of South Africa,” p. 82). Through a rare mix of world-class talent in building composite structures and labor rates that allow a builder to competitively market a 25,000-man-hour product, Nexus has created a beautiful vessel. The hull is a sandwich of fiber with a closed-cell foam core, bonded together using only epoxy resin — the best boatbuilding resin available. The fibers are E-glass with carbon reinforcement in the high-load areas, a good blend of cost containment and above-average strength-to-weight ratios. The cores are vacuum-bagged for thorough bonding, including in the interior bulkheads and furniture. Throughout the boat, fiber-to-resin ratios are artfully managed.

“Jonathan Paarman has a no-stainless fetish,” says Berman, referring to the chief laminator at Nexus Yachts. Handrails and posts for radar and antennas are all built from lightweight composites.

I sailed hull number one in Cape Town, South Africa, shortly after it launched. Even loaded for long fishing expeditions — including with a factory-installed ice flaker — this boat was a special pleasure to sail. The hull form features a reverse bow and scoop transom for a long waterline, but no chines or other tricks that add cabin volume at the cost of hydrodynamic flow. We sailed at 9.4 knots upwind in 11 knots of breeze; cracked off to 120 degrees apparent with a screacher up, we sailed at 12.3 knots.

The cabin designs are a result of hulls that were built for sailing. A head and massive stall shower occupy the aft end of the owner’s hull, while the master cabin lands near the hull’s centerline. A walk-around queen is placed athwartships and up on the bridgedeck. Guest accommodations are located in the port hull, with an athwartship bunk forward and an in-line berth in the aft cabin; a head and guest shower are located amidships.

The helm station features an articulating wheel pedestal. On some monohulls, we’ve seen this arrangement as an alternative to twin helms. On the 526, it allows the helmsman to steer from one of two positions at the aft end of the cabin bulkhead: either “up,” with full, direct visibility of the deck and sails, or “down,” on the cockpit sole with full weather protection and visibility through the cabin’s windows — which are made from tempered glass, not Lexan, which can craze over time.

Having joined the payload-versus-performance multihull debate for much of the past two decades myself, I stepped off the Balance 526 thinking it might just be the new scratch boat in that fight.

Tim Murphy is a CW editor-at-large and a longtime Boat of the Year judge.


Recent News

We take pride in our happy customers

I had a very good experience with Will Miller at TMC. He is very knowledgeable about his business and took care of all aspects of my purchase, and where he couldn’t places me in touch with the people who could. The transaction went very smoothly as far as I was concerned.

— Jeff

“Thank you Conor, for your integrity, continuous input and guidance during this process. The Multihull Company is a class act that I have had the honor of working with twice. I look forward to referring Conor to all I know in need of a broker.”

— Jeff and Julie

Your team delivered on every mark. You’ve got an amazing broker in Mark Wattrus and I’m confident you will have continued success moving forward together. He was available 24/7 whenever I had questions. We had a great initial visit on the boat and his marketing plan and photos were superb

— Jimmy

I couldn’t be more grateful to have had TMC on my side throughout this process. Buying was a new experience for me and I know it wasn’t the easiest deal you’ve ever had, but you were competent and kind throughout.


— Chad

Thanks Jaryd, you made this process as smooth as we could have hoped for! We are most certainly going to have some memorable times aboard!

— Cordell and Jennifer

See All Testimonials

Trust & ExpertiseAbout Us

Successful relationships cannot exist without it. At The Multihull Company we base every relationship on a firm commitment to earning and retaining our client’s trust.

Advice of any kind is valuable only when grounded in hard-won expertise. It too, must be trustworthy. Trust and expertise define the heart and soul of The Multihull Company. We are a team of skilled professionals who thrive on providing expert, trustworthy advice and service to catamaran and trimaran sailors around the globe.

Read More

Follow us @themultihullcompany