About
2023 / 2024 HammerCat 45
Hammer Yachts is proud to introduce the 2023 / 2024 HammerCat 45.
Built in epoxy and carbon fiber, this example of the next generation of power catamarans will be turning heads in any port.
No need for quad engines with epoxy / carbon fiber construction. Hammer Yachts' focus is on "weight vs horsepower" ratio.
Work on the moulds has started, production of the first hulls to start Q2 2023, first hull ready Q1 2024
Specifications
SPECS
MEASUREMENTS
ENGINE(S)
TANKS
Accommodations
Description:
2024 HammerCat 45 lay out versions:
Alternate lay out versions per request
HammerCat concept:
-Everything Hammer Yachts does revolves around the ‘weight vs horsepower’ ratio. If we build a light and strong vessel, we don’t need more engines and more tankage to compensate for the additional weight. Other center console power catamarans use a “quad engine” set up on their similar sized models and they weight up to 35,000 Lbs. The HammerCat 45 is build out of epoxy with vacuum infused e-glass, resulting in the “wet weight” of the vessel at 20,000 Lbs. This means that we can use half the horsepower compared to our competition and still get the same performance, yet ensuring the strength and durability required for offshore boating in any conditions.
-With twin 500 HP engines the top end will be >55 mph
-The HammerCat 45 is unsinkable: 65 cubic feet of XPS foam ensures that the HammerCat 45 will remain afloat if you hit a container / underwater object at high speed
-The carbon fiber hardtop of the HammerCat 45 measures 11’ x 16’ and weights just 250 Lbs., so there is no weight high up which can influence the ride in offshore conditions. The hardtop is much larger & wider than on most other center consoles, so you and your crew are protected from the sun / elements.
-The HammerCat is built for longevity using construction techniques normally only seen on offshore racing yachts.
-Epoxy has three to five times the flexural strength of polyester/ vinylester resins making the HammerCat stronger, more durable, lighter and thus more agile, seaworthy, fuel-efficient and more fun to drive. Epoxy resin is 25 percent stronger than the polyester resin used in most boatbuilding, with higher elongation properties for greater durability.
-The construction methods and materials employed by Hammer Yachts create stronger, yet lighter hulls that require less horsepower than the competitors and enjoy far better fuel efficiency getting up to twice the miles per gallon of similar boats.
-The HammerCat 45 has classic timeless lines with her Carolina bow, flared hull and great curves.
-It’s all about the ride: just like her smaller sister, the HammerCat 35, we designed the HammerCat 45 from the ground up: wave piercing hulls, no flat areas in the leading edges, high bridge deck clearance and a low center of gravity. The combination of these design features ensures a smooth ride where your passengers / crew don’t get slammed around and have to brace for impact in rough water. HammerCats slice through inclement conditions effortlessly.
Standard equipment included in base price:
Electrical system:
Engines & fuel:
Deck gear:
Construction:
Electronics:
Cabin in center console:
Optional equipment:
Disclaimer
The Company offers the details of this vessel in good faith but cannot guarantee or warrant the accuracy of this information nor warrant the condition of the vessel. A buyer should instruct his agents, or his surveyors, to investigate such details as the buyer desires validated. This vessel is offered subject to prior sale, price change, or withdrawal without notice.
Request More Information
I had a very good experience with Will Miller at TMC. He is very knowledgeable about his business and took care of all aspects of my purchase, and where he couldn’t places me in touch with the people who could. The transaction went very smoothly as far as I was concerned.
“Thank you Conor, for your integrity, continuous input and guidance during this process. The Multihull Company is a class act that I have had the honor of working with twice. I look forward to referring Conor to all I know in need of a broker.”
Your team delivered on every mark. You’ve got an amazing broker in Mark Wattrus and I’m confident you will have continued success moving forward together. He was available 24/7 whenever I had questions. We had a great initial visit on the boat and his marketing plan and photos were superb
I couldn’t be more grateful to have had TMC on my side throughout this process. Buying was a new experience for me and I know it wasn’t the easiest deal you’ve ever had, but you were competent and kind throughout.
Thanks Jaryd, you made this process as smooth as we could have hoped for! We are most certainly going to have some memorable times aboard!
Successful relationships cannot exist without it. At The Multihull Company we base every relationship on a firm commitment to earning and retaining our client’s trust.
Advice of any kind is valuable only when grounded in hard-won expertise. It too, must be trustworthy. Trust and expertise define the heart and soul of The Multihull Company. We are a team of skilled professionals who thrive on providing expert, trustworthy advice and service to catamaran and trimaran sailors around the globe.
Read More