The Multihull CompanyFrançais
Logo
Multihulls Mid-Atlantic
Corporate Offices: Philadelphia, Pa		 Multihulls Canada
Baddeck, Nova Scotia		 Multihulls Caribbean
Catamaran Village, Trinidad		 Multihulls Northeast
Mystic, Connecticut		 Multihulls Northwest
Seattle, Washington		 Multihulls Florida
Ft. Lauderdale, Florida

Dean 441

Testimonials by Dean Owners

The Dean 441 was very impressive. Additionally, unlike Lagoon, they made it clear that they were willing to customize a new boat to suit my needs.
Dean Customer
Dean 441

Experience The Multihull Company Difference

441
Specifications and Pricing

Dimensions

LOA: 43' 8"
 Beam: 23.6' Displacement: 26,455 lbs
Draft: 3.6' Bridge Clearance: 68'

Engines

Engine(s): Vetus Mitsubishi Engine(s) HP: 42 Engine Model: M4-17

Tankage

Fuel: 145 gallons Water: 2 x 89 Gallons


Hull and Appendages
  • The hull is of sandwich composite construction using 1200gm² quadriaxial stitched fabrics and an end grain balsa core composite material, but solid GRP below waterline.
  • This gives a stiff laminate with excellent strength and fatigue properties.
  • The engine beds are of GRP and bonded to the hull.
  • Sea-cocks under water line are of a silicon bronze material and located in accessible positions.
  • Hose connections to inboard side of sea-cocks have two stainless steel hose clamps.
  • Standard gelcoat colour is white.
  • Rudders are solid stainless steel boasting a 45mm solid shaft with Vetus hydraulic steering system.
  • Structural bulkheads are Balsa composite construction and laminated to hull and deck.
  • Bulkhead thickness is 22mm.
  • Vessel's name supplied on transom.

Deck and Fittings
  • The deck is of sandwich composite construction using 1200gm² quadriaxial-stitched fabrics with end grain Balsa core.
  • High density RL material under all deck fittings with stainless steel backing plates.
  • Deck surface has a moulded non-slip finish.
  • Standard gelcoat colour is white.
  • Winches are all 2 speed and self-tailing.
  • Two primary sheet winches are size 53, 2-speed.
  • One secondary aft winch (for mainsail traveller) size 40, 2 speed.
  • Two halyard winches on mast are size 40, 2-speed.
  • Electric anchor windlass with foot switches on foredeck.
  • Stainless steel stem head fitting with nylon anchor roller.
  • Stainless steel shroud chain plates are bolted to structural bulkheads.
  • Two water tank fillers.
  • One diesel filler.
  • Breathers exit at deck level.
  • Electrical gooseneck at mast.
  • Furling line lead blocks and jammer.
  • Fore deck hatches for storage with recessed catches.
  • Pressurized freshwater hot and cold shower on transom.
  • Cabin windows, non-opening, around saloon in 10mm tinted acrylic.
  • 10 opening deck hatches and 6 opening port holes.
  • Two x 9kg gas bottles with LP regulator in self-ventilating gas locker in front locker.
  • Steaming lights on pull-pits, mast and stern.
  • Double seat helm chair.
  • Power dampened compass ahead of helm station.
  • Lifeline gates each side-midship.
  • Hatches are all lockable.
  • GRP white moulding toe rail covering hull deck bond.
  • Two pull-pits, eight stantions and two aft stantions all 700mm high of stainless steel with all bases bolted through deck.
  • 4 corner cleats and 2 spring cleats for marina berthing.
  • 1 anchor cleat.
  • Two aluminium Genoa tracks with heavy-duty cars, stops and ends.
  • Complete main-sheeting system with blocks.
  • Sliding entrance door with 6.5mm laminated clear glass, locking.
  • Engine throttle and gear controls by Vetus.
  • Two wet lockers in cockpit for storage.
  • GRP cockpit table.
  • Drains in cockpit floor with protection cowl under bridge deck.
  • All lockers are self-draining and flow coated.
  • All sailing sheets supplied for Main, Genoa and Traveller.
  • Two anodized aluminium cross beams, with two UV protected white trampolines lashed to deck.
  • Dual lifelines of 4mm stainless steel wire with 6mm bottle-screw for tensioning.
  • Folding stainless steel swimming ladder port side with twin full length handrails up each stepped transom.
  • Speed, wind and depth instruments.
  • Targa bar.
  • Life raft locker.
  • Emergency tiller arm.
  • 2 winch handle pockets in cockpit.
  • 1 dinghy cleat on each transom.
  • 3 large, non-opening windows in 10mm Acrylic in hull sides – 1 in each double cabin size approx 900 x 400mm.

Interior Finishes
  • All joinery work and finishing in the living area are done in accordance with the best yacht practice, using first-grade materials.
  • All Veneers and solid wood are cherry or maple and sprayed with a polyurethane acrylic lacquer for a satin sheen finish.
  • All furniture has rounded corners.
  • All ceilings and topside linings in white GRP.
  • All wood has five layers of lacquer applied.
  • All furniture is set in an ultra modern GRP capping trim.
  • Teak and maple flooring throughout.
  • 5 x fire extinguishers.

Saloon
  • Semi-circular seating with cloth upholstery.
  • Saloon Table.
  • Six halogen recessed lights.
  • Escape hatch in saloon floor.
  • Complete galley with pressurized H & C water and sink.
  • 4 opening deck hatches.
  • Sliding door to cockpit.
  • Teak and Maple sole flooring.

Navigation Station
  • Situated in saloon.
  • Mounted in GRP console are the following: 24 way switchboard with Carling circuit breakers, digital battery monitoring system and navigation instruments.
  • Chart locker at Nav table with double door.
  • One set of drawers.
  • Battery switch.
  • Lights.
  • 220 v outlets.
  • Cupboards for stowage of navigation equipment.

Forecabins - Port and Starboard
  • King-size 2.1m x 1.5m bed with angled headboard and lee-board.
  • Two cabinets with steps in-between.
  • Opposite is a huge wardrobe with four shelves and hanging locker.
  • Dressing table with two cupboards underneath.
  • Two opening deck hatches.
  • Large non opening hull window.
  • Reading lights and one fluorescent cabin light.
  • Teak & maple sole flooring.
  • 220 v outlet.

En-Suite Heads - Port and Starboard
  • Toilet with hand basin and separate shower.
  • Pressurized hot and cold water.
  • Opening port light and fluorescent light.
  • Mirror, towel rails, soap holders, etc.

Galley
  • Situated in mid starboard hull/or on bridge deck depending on layout.
  • In the “Galley up version “a single berth is located in the Starboard hull – or additional cupboards.
  • Large counter tops with double sink and draining board.
  • Pressurized hot and cold water with mixer faucet.
  • Stainless steel Four-burner gas stove with flame failure device and pot holders.
  • Stainless steel Oven with grill.
  • Cupboards for ample storage.
  • One set of drawers.
  • 12v compressor driven fridge-capacity 130L.
  • 1 top access garbage can, bags removed by separate door.
  • Recessed halogen light and fluorescent lights.
  • Gas shut off valve.
  • Teak and maple sole flooring.
  • Opening deck hatches.
  • All finishes in GRP with solid cherry / maple trimmings.
  • Three step stairway to saloon.
  • 12v Compressor driven deep freeze 90L.
  • 220 v outlets.

Price: 345,000 Euros